Oil & Gas Fired Boiler

Product Details:

A boiler is a steel pressure vessel in which water under pressure is converted into steam by the application of combustion. In other words, it is simply a heat exchanger which uses radiant heat and hot flue gases, liberated from burning fuel, to generate steam and hot water for heating and processing loads.

The heating surface is any part of the boiler; hot gases of combustion are on one side and water on the other. Any part of the boiler metal that actually contributes to making steam is heating surface. The amount of heating surface of a boiler is expressed in square meters. The larger the heating surface a boiler has, the more efficient it becomes.

Applications:
Food process Industries, Chemical and Pharmaceuticals, Hospitality industry and other process industries

Product Details:

Construction:

ENERGYPACK Boilers are three pass wet back, horizontal, smoke tube type fusion welded. Boilers are made to IBR/DIN/BS/ASME-code. Components are engineered for maximum safety, highest efficiency, dependability and quiet operation. Wet back models eliminate rear end refractory and its inherent maintenance cost, reduces stress of rear tube sheet and ligament cracking, radiant heat is eliminated, lengthening tube life and reducing heat loss from rear turnaround.

Unique design features:

• Fully automatic pressure jet Burner – Boiler furnace design suitable for Imported Weishaupt/
• Reillo & Indian modulating burner.
• Efficiency enhancement – Optional accessories such as air preheater and economizer can be
• Integrated with the main unit.
• Automation with Programmable Logic Controllers (PLC) with Supervisory Control and Data
• Acquisition (SCADA) system can also be offered at an extra cost. Standard boilers are supplied
• with fully automatic operation with safety interlocks & alarm.

Erection & maintenance:

“Energypack” Boilers are shop assembled and no special foundation is required. Each unit is a complete package ready for quick installation and connection for your service lines. For easy internal maintenance and cleaning, Manholes & Mudholes are well placed. Boiler tubes are easy to inspect as hinged front & back doors enable quick and easy Maintenance, inspection or cleaning. Spares are easily available.

Performance:

Efficiency of oil fired boiler on N.C.V. is 88% with B.S./DIN tolerance on a very wide working range and higher figures are not un-common. Steam of high purity and dryness fraction is generated as Heat Transfer surfaces in the boiler is judiciously accommodated. 

Product Details:

Construction:

ENERGYPACK Boilers are three pass wet back, horizontal, smoke tube type fusion welded. Boilers are made to IBR/DIN/BS/ASME-code. Components are engineered for maximum safety, highest efficiency, dependability and quiet operation. Wet back models eliminate rear end refractory and its inherent maintenance cost, reduces stress of rear tube sheet and ligament cracking, radiant heat is eliminated, lengthening tube life and reducing heat loss from rear turnaround.

Unique design features:

• Fully automatic pressure jet Burner – Boiler furnace design suitable for Imported Weishaupt/
• Reillo & Indian modulating burner.
• Efficiency enhancement – Optional accessories such as air preheater and economizer can be
• Integrated with the main unit.
• Automation with Programmable Logic Controllers (PLC) with Supervisory Control and Data
• Acquisition (SCADA) system can also be offered at an extra cost. Standard boilers are supplied
• with fully automatic operation with safety interlocks & alarm.

Erection & maintenance:

“Energypack” Boilers are shop assembled and no special foundation is required. Each unit is a complete package ready for quick installation and connection for your service lines. For easy internal maintenance and cleaning, Manholes & Mudholes are well placed. Boiler tubes are easy to inspect as hinged front & back doors enable quick and easy Maintenance, inspection or cleaning. Spares are easily available.

Performance:

Efficiency of oil fired boiler on N.C.V. is 88% with B.S./DIN tolerance on a very wide working range and higher figures are not un-common. Steam of high purity and dryness fraction is generated as Heat Transfer surfaces in the boiler is judiciously accommodated. 

Product Details:

Construction:

ENERGYPACK Boilers are three pass wet back, horizontal, smoke tube type fusion welded. Boilers are made to IBR/DIN/BS/ASME-code. Components are engineered for maximum safety, highest efficiency, dependability and quiet operation. Wet back models eliminate rear end refractory and its inherent maintenance cost, reduces stress of rear tube sheet and ligament cracking, radiant heat is eliminated, lengthening tube life and reducing heat loss from rear turnaround.

Unique design features:

• Fully automatic pressure jet Burner – Boiler furnace design suitable for Imported Weishaupt/
• Reillo & Indian modulating burner.
• Efficiency enhancement – Optional accessories such as air preheater and economizer can be
• Integrated with the main unit.
• Automation with Programmable Logic Controllers (PLC) with Supervisory Control and Data
• Acquisition (SCADA) system can also be offered at an extra cost. Standard boilers are supplied
• with fully automatic operation with safety interlocks & alarm.

Erection & maintenance:

“Energypack” Boilers are shop assembled and no special foundation is required. Each unit is a complete package ready for quick installation and connection for your service lines. For easy internal maintenance and cleaning, Manholes & Mudholes are well placed. Boiler tubes are easy to inspect as hinged front & back doors enable quick and easy Maintenance, inspection or cleaning. Spares are easily available.

Performance:

Efficiency of oil fired boiler on N.C.V. is 88% with B.S./DIN tolerance on a very wide working range and higher figures are not un-common. Steam of high purity and dryness fraction is generated as Heat Transfer surfaces in the boiler is judiciously accommodated. 

Product Details:

Construction:

ENERGYPACK Boilers are three pass wet back, horizontal, smoke tube type fusion welded. Boilers are made to IBR/DIN/BS/ASME-code. Components are engineered for maximum safety, highest efficiency, dependability and quiet operation. Wet back models eliminate rear end refractory and its inherent maintenance cost, reduces stress of rear tube sheet and ligament cracking, radiant heat is eliminated, lengthening tube life and reducing heat loss from rear turnaround.

Unique design features:

• Fully automatic pressure jet Burner – Boiler furnace design suitable for Imported Weishaupt/
• Reillo & Indian modulating burner.
• Efficiency enhancement – Optional accessories such as air preheater and economizer can be
• Integrated with the main unit.
• Automation with Programmable Logic Controllers (PLC) with Supervisory Control and Data
• Acquisition (SCADA) system can also be offered at an extra cost. Standard boilers are supplied
• with fully automatic operation with safety interlocks & alarm.

Erection & maintenance:

“Energypack” Boilers are shop assembled and no special foundation is required. Each unit is a complete package ready for quick installation and connection for your service lines. For easy internal maintenance and cleaning, Manholes & Mudholes are well placed. Boiler tubes are easy to inspect as hinged front & back doors enable quick and easy Maintenance, inspection or cleaning. Spares are easily available.

Performance:

Efficiency of oil fired boiler on N.C.V. is 88% with B.S./DIN tolerance on a very wide working range and higher figures are not un-common. Steam of high purity and dryness fraction is generated as Heat Transfer surfaces in the boiler is judiciously accommodated. 

Product Details:

Construction:

ENERGYPACK Boilers are three pass wet back, horizontal, smoke tube type fusion welded. Boilers are made to IBR/DIN/BS/ASME-code. Components are engineered for maximum safety, highest efficiency, dependability and quiet operation. Wet back models eliminate rear end refractory and its inherent maintenance cost, reduces stress of rear tube sheet and ligament cracking, radiant heat is eliminated, lengthening tube life and reducing heat loss from rear turnaround.

Unique design features:

• Fully automatic pressure jet Burner – Boiler furnace design suitable for Imported Weishaupt/
• Reillo & Indian modulating burner.
• Efficiency enhancement – Optional accessories such as air preheater and economizer can be
• Integrated with the main unit.
• Automation with Programmable Logic Controllers (PLC) with Supervisory Control and Data
• Acquisition (SCADA) system can also be offered at an extra cost. Standard boilers are supplied
• with fully automatic operation with safety interlocks & alarm.

Erection & maintenance:

“Energypack” Boilers are shop assembled and no special foundation is required. Each unit is a complete package ready for quick installation and connection for your service lines. For easy internal maintenance and cleaning, Manholes & Mudholes are well placed. Boiler tubes are easy to inspect as hinged front & back doors enable quick and easy Maintenance, inspection or cleaning. Spares are easily available.

Performance:

Efficiency of oil fired boiler on N.C.V. is 88% with B.S./DIN tolerance on a very wide working range and higher figures are not un-common. Steam of high purity and dryness fraction is generated as Heat Transfer surfaces in the boiler is judiciously accommodated. 

Product Details:

Construction:

ENERGYPACK Boilers are three pass wet back, horizontal, smoke tube type fusion welded. Boilers are made to IBR/DIN/BS/ASME-code. Components are engineered for maximum safety, highest efficiency, dependability and quiet operation. Wet back models eliminate rear end refractory and its inherent maintenance cost, reduces stress of rear tube sheet and ligament cracking, radiant heat is eliminated, lengthening tube life and reducing heat loss from rear turnaround.

Unique design features:

• Fully automatic pressure jet Burner – Boiler furnace design suitable for Imported Weishaupt/
• Reillo & Indian modulating burner.
• Efficiency enhancement – Optional accessories such as air preheater and economizer can be
• Integrated with the main unit.
• Automation with Programmable Logic Controllers (PLC) with Supervisory Control and Data
• Acquisition (SCADA) system can also be offered at an extra cost. Standard boilers are supplied
• with fully automatic operation with safety interlocks & alarm.

Erection & maintenance:

“Energypack” Boilers are shop assembled and no special foundation is required. Each unit is a complete package ready for quick installation and connection for your service lines. For easy internal maintenance and cleaning, Manholes & Mudholes are well placed. Boiler tubes are easy to inspect as hinged front & back doors enable quick and easy Maintenance, inspection or cleaning. Spares are easily available.

Performance:

Efficiency of oil fired boiler on N.C.V. is 88% with B.S./DIN tolerance on a very wide working range and higher figures are not un-common. Steam of high purity and dryness fraction is generated as Heat Transfer surfaces in the boiler is judiciously accommodated. 

Product Details:

Construction:

ENERGYPACK Boilers are three pass wet back, horizontal, smoke tube type fusion welded. Boilers are made to IBR/DIN/BS/ASME-code. Components are engineered for maximum safety, highest efficiency, dependability and quiet operation. Wet back models eliminate rear end refractory and its inherent maintenance cost, reduces stress of rear tube sheet and ligament cracking, radiant heat is eliminated, lengthening tube life and reducing heat loss from rear turnaround.

Unique design features:

• Fully automatic pressure jet Burner – Boiler furnace design suitable for Imported Weishaupt/
• Reillo & Indian modulating burner.
• Efficiency enhancement – Optional accessories such as air preheater and economizer can be
• Integrated with the main unit.
• Automation with Programmable Logic Controllers (PLC) with Supervisory Control and Data
• Acquisition (SCADA) system can also be offered at an extra cost. Standard boilers are supplied
• with fully automatic operation with safety interlocks & alarm.

Erection & maintenance:

“Energypack” Boilers are shop assembled and no special foundation is required. Each unit is a complete package ready for quick installation and connection for your service lines. For easy internal maintenance and cleaning, Manholes & Mudholes are well placed. Boiler tubes are easy to inspect as hinged front & back doors enable quick and easy Maintenance, inspection or cleaning. Spares are easily available.

Performance:

Efficiency of oil fired boiler on N.C.V. is 88% with B.S./DIN tolerance on a very wide working range and higher figures are not un-common. Steam of high purity and dryness fraction is generated as Heat Transfer surfaces in the boiler is judiciously accommodated. 

Product Details:

Construction:

ENERGYPACK Boilers are three pass wet back, horizontal, smoke tube type fusion welded. Boilers are made to IBR/DIN/BS/ASME-code. Components are engineered for maximum safety, highest efficiency, dependability and quiet operation. Wet back models eliminate rear end refractory and its inherent maintenance cost, reduces stress of rear tube sheet and ligament cracking, radiant heat is eliminated, lengthening tube life and reducing heat loss from rear turnaround.

Unique design features:

• Fully automatic pressure jet Burner – Boiler furnace design suitable for Imported Weishaupt/
• Reillo & Indian modulating burner.
• Efficiency enhancement – Optional accessories such as air preheater and economizer can be
• Integrated with the main unit.
• Automation with Programmable Logic Controllers (PLC) with Supervisory Control and Data
• Acquisition (SCADA) system can also be offered at an extra cost. Standard boilers are supplied
• with fully automatic operation with safety interlocks & alarm.

Erection & maintenance:

“Energypack” Boilers are shop assembled and no special foundation is required. Each unit is a complete package ready for quick installation and connection for your service lines. For easy internal maintenance and cleaning, Manholes & Mudholes are well placed. Boiler tubes are easy to inspect as hinged front & back doors enable quick and easy Maintenance, inspection or cleaning. Spares are easily available.

Performance:

Efficiency of oil fired boiler on N.C.V. is 88% with B.S./DIN tolerance on a very wide working range and higher figures are not un-common. Steam of high purity and dryness fraction is generated as Heat Transfer surfaces in the boiler is judiciously accommodated. 

Product Details:

Construction:

ENERGYPACK Boilers are three pass wet back, horizontal, smoke tube type fusion welded. Boilers are made to IBR/DIN/BS/ASME-code. Components are engineered for maximum safety, highest efficiency, dependability and quiet operation. Wet back models eliminate rear end refractory and its inherent maintenance cost, reduces stress of rear tube sheet and ligament cracking, radiant heat is eliminated, lengthening tube life and reducing heat loss from rear turnaround.

Unique design features:

• Fully automatic pressure jet Burner – Boiler furnace design suitable for Imported Weishaupt/
• Reillo & Indian modulating burner.
• Efficiency enhancement – Optional accessories such as air preheater and economizer can be
• Integrated with the main unit.
• Automation with Programmable Logic Controllers (PLC) with Supervisory Control and Data
• Acquisition (SCADA) system can also be offered at an extra cost. Standard boilers are supplied
• with fully automatic operation with safety interlocks & alarm.

Erection & maintenance:

“Energypack” Boilers are shop assembled and no special foundation is required. Each unit is a complete package ready for quick installation and connection for your service lines. For easy internal maintenance and cleaning, Manholes & Mudholes are well placed. Boiler tubes are easy to inspect as hinged front & back doors enable quick and easy Maintenance, inspection or cleaning. Spares are easily available.

Performance:

Efficiency of oil fired boiler on N.C.V. is 88% with B.S./DIN tolerance on a very wide working range and higher figures are not un-common. Steam of high purity and dryness fraction is generated as Heat Transfer surfaces in the boiler is judiciously accommodated. 

Product Details:

Construction:

ENERGYPACK Boilers are three pass wet back, horizontal, smoke tube type fusion welded. Boilers are made to IBR/DIN/BS/ASME-code. Components are engineered for maximum safety, highest efficiency, dependability and quiet operation. Wet back models eliminate rear end refractory and its inherent maintenance cost, reduces stress of rear tube sheet and ligament cracking, radiant heat is eliminated, lengthening tube life and reducing heat loss from rear turnaround.

Unique design features:

• Fully automatic pressure jet Burner – Boiler furnace design suitable for Imported Weishaupt/
• Reillo & Indian modulating burner.
• Efficiency enhancement – Optional accessories such as air preheater and economizer can be
• Integrated with the main unit.
• Automation with Programmable Logic Controllers (PLC) with Supervisory Control and Data
• Acquisition (SCADA) system can also be offered at an extra cost. Standard boilers are supplied
• with fully automatic operation with safety interlocks & alarm.

Erection & maintenance:

“Energypack” Boilers are shop assembled and no special foundation is required. Each unit is a complete package ready for quick installation and connection for your service lines. For easy internal maintenance and cleaning, Manholes & Mudholes are well placed. Boiler tubes are easy to inspect as hinged front & back doors enable quick and easy Maintenance, inspection or cleaning. Spares are easily available.

Performance:

Efficiency of oil fired boiler on N.C.V. is 88% with B.S./DIN tolerance on a very wide working range and higher figures are not un-common. Steam of high purity and dryness fraction is generated as Heat Transfer surfaces in the boiler is judiciously accommodated. 

Product Details:

Construction:

ENERGYPACK Boilers are three pass wet back, horizontal, smoke tube type fusion welded. Boilers are made to IBR/DIN/BS/ASME-code. Components are engineered for maximum safety, highest efficiency, dependability and quiet operation. Wet back models eliminate rear end refractory and its inherent maintenance cost, reduces stress of rear tube sheet and ligament cracking, radiant heat is eliminated, lengthening tube life and reducing heat loss from rear turnaround.

Unique design features:

• Fully automatic pressure jet Burner – Boiler furnace design suitable for Imported Weishaupt/
• Reillo & Indian modulating burner.
• Efficiency enhancement – Optional accessories such as air preheater and economizer can be
• Integrated with the main unit.
• Automation with Programmable Logic Controllers (PLC) with Supervisory Control and Data
• Acquisition (SCADA) system can also be offered at an extra cost. Standard boilers are supplied
• with fully automatic operation with safety interlocks & alarm.

Erection & maintenance:

“Energypack” Boilers are shop assembled and no special foundation is required. Each unit is a complete package ready for quick installation and connection for your service lines. For easy internal maintenance and cleaning, Manholes & Mudholes are well placed. Boiler tubes are easy to inspect as hinged front & back doors enable quick and easy Maintenance, inspection or cleaning. Spares are easily available.

Performance:

Efficiency of oil fired boiler on N.C.V. is 88% with B.S./DIN tolerance on a very wide working range and higher figures are not un-common. Steam of high purity and dryness fraction is generated as Heat Transfer surfaces in the boiler is judiciously accommodated. 

Product Details:

Construction:

ENERGYPACK Boilers are three pass wet back, horizontal, smoke tube type fusion welded. Boilers are made to IBR/DIN/BS/ASME-code. Components are engineered for maximum safety, highest efficiency, dependability and quiet operation. Wet back models eliminate rear end refractory and its inherent maintenance cost, reduces stress of rear tube sheet and ligament cracking, radiant heat is eliminated, lengthening tube life and reducing heat loss from rear turnaround.

Unique design features:

• Fully automatic pressure jet Burner – Boiler furnace design suitable for Imported Weishaupt/
• Reillo & Indian modulating burner.
• Efficiency enhancement – Optional accessories such as air preheater and economizer can be
• Integrated with the main unit.
• Automation with Programmable Logic Controllers (PLC) with Supervisory Control and Data
• Acquisition (SCADA) system can also be offered at an extra cost. Standard boilers are supplied
• with fully automatic operation with safety interlocks & alarm.

Erection & maintenance:

“Energypack” Boilers are shop assembled and no special foundation is required. Each unit is a complete package ready for quick installation and connection for your service lines. For easy internal maintenance and cleaning, Manholes & Mudholes are well placed. Boiler tubes are easy to inspect as hinged front & back doors enable quick and easy Maintenance, inspection or cleaning. Spares are easily available.

Performance:

Efficiency of oil fired boiler on N.C.V. is 88% with B.S./DIN tolerance on a very wide working range and higher figures are not un-common. Steam of high purity and dryness fraction is generated as Heat Transfer surfaces in the boiler is judiciously accommodated. 

Product Details:

Construction:

ENERGYPACK Boilers are three pass wet back, horizontal, smoke tube type fusion welded. Boilers are made to IBR/DIN/BS/ASME-code. Components are engineered for maximum safety, highest efficiency, dependability and quiet operation. Wet back models eliminate rear end refractory and its inherent maintenance cost, reduces stress of rear tube sheet and ligament cracking, radiant heat is eliminated, lengthening tube life and reducing heat loss from rear turnaround.

Unique design features:

• Fully automatic pressure jet Burner – Boiler furnace design suitable for Imported Weishaupt/
• Reillo & Indian modulating burner.
• Efficiency enhancement – Optional accessories such as air preheater and economizer can be
• Integrated with the main unit.
• Automation with Programmable Logic Controllers (PLC) with Supervisory Control and Data
• Acquisition (SCADA) system can also be offered at an extra cost. Standard boilers are supplied
• with fully automatic operation with safety interlocks & alarm.

Erection & maintenance:

“Energypack” Boilers are shop assembled and no special foundation is required. Each unit is a complete package ready for quick installation and connection for your service lines. For easy internal maintenance and cleaning, Manholes & Mudholes are well placed. Boiler tubes are easy to inspect as hinged front & back doors enable quick and easy Maintenance, inspection or cleaning. Spares are easily available.

Performance:

Efficiency of oil fired boiler on N.C.V. is 88% with B.S./DIN tolerance on a very wide working range and higher figures are not un-common. Steam of high purity and dryness fraction is generated as Heat Transfer surfaces in the boiler is judiciously accommodated. 

Product Details:

Construction:

ENERGYPACK Boilers are three pass wet back, horizontal, smoke tube type fusion welded. Boilers are made to IBR/DIN/BS/ASME-code. Components are engineered for maximum safety, highest efficiency, dependability and quiet operation. Wet back models eliminate rear end refractory and its inherent maintenance cost, reduces stress of rear tube sheet and ligament cracking, radiant heat is eliminated, lengthening tube life and reducing heat loss from rear turnaround.

Unique design features:

• Fully automatic pressure jet Burner – Boiler furnace design suitable for Imported Weishaupt/
• Reillo & Indian modulating burner.
• Efficiency enhancement – Optional accessories such as air preheater and economizer can be
• Integrated with the main unit.
• Automation with Programmable Logic Controllers (PLC) with Supervisory Control and Data
• Acquisition (SCADA) system can also be offered at an extra cost. Standard boilers are supplied
• with fully automatic operation with safety interlocks & alarm.

Erection & maintenance:

“Energypack” Boilers are shop assembled and no special foundation is required. Each unit is a complete package ready for quick installation and connection for your service lines. For easy internal maintenance and cleaning, Manholes & Mudholes are well placed. Boiler tubes are easy to inspect as hinged front & back doors enable quick and easy Maintenance, inspection or cleaning. Spares are easily available.

Performance:

Efficiency of oil fired boiler on N.C.V. is 88% with B.S./DIN tolerance on a very wide working range and higher figures are not un-common. Steam of high purity and dryness fraction is generated as Heat Transfer surfaces in the boiler is judiciously accommodated. 

Product Details:

Construction:

ENERGYPACK Boilers are three pass wet back, horizontal, smoke tube type fusion welded. Boilers are made to IBR/DIN/BS/ASME-code. Components are engineered for maximum safety, highest efficiency, dependability and quiet operation. Wet back models eliminate rear end refractory and its inherent maintenance cost, reduces stress of rear tube sheet and ligament cracking, radiant heat is eliminated, lengthening tube life and reducing heat loss from rear turnaround.

Unique design features:

• Fully automatic pressure jet Burner – Boiler furnace design suitable for Imported Weishaupt/
• Reillo & Indian modulating burner.
• Efficiency enhancement – Optional accessories such as air preheater and economizer can be
• Integrated with the main unit.
• Automation with Programmable Logic Controllers (PLC) with Supervisory Control and Data
• Acquisition (SCADA) system can also be offered at an extra cost. Standard boilers are supplied
• with fully automatic operation with safety interlocks & alarm.

Erection & maintenance:

“Energypack” Boilers are shop assembled and no special foundation is required. Each unit is a complete package ready for quick installation and connection for your service lines. For easy internal maintenance and cleaning, Manholes & Mudholes are well placed. Boiler tubes are easy to inspect as hinged front & back doors enable quick and easy Maintenance, inspection or cleaning. Spares are easily available.

Performance:

Efficiency of oil fired boiler on N.C.V. is 88% with B.S./DIN tolerance on a very wide working range and higher figures are not un-common. Steam of high purity and dryness fraction is generated as Heat Transfer surfaces in the boiler is judiciously accommodated.